Sumitron ESD Mat Flooring Solutions
Sumitron ESD Mat Flooring Solutions
The Sumitron ESD mats are used on floor to prevent damages to electronic equipment from electrostatic discharges. ESD control is required during the manufacturing and assembly of electronic components. Operator actions such as, walking, moving chairs, and so on causes generation of static discharges.
The mat is made of three layers of homogenously constructed solid polyvinyl chloride with a layer of conductive fleece in between. This composition provides very good physical and electrical properties. The mats have very good resistance to degradation by inorganic acids, organic acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.
ESD Vinyl Mats are ideal for static dissipative and flexible work surfaces. These ESD Vinyl Mats have a solid vinyl, homogeneous construction with a buried conductive layer in between, which provides superior physical and electrical qualities.
CONSTRUCTION
A homogenous construction, our three layer mat consists of solid polyvinyl chloride surrounding a layer of Conductive fleece, giving it consistent electrical properties in addition to superior physical properties.
CHEMICAL RESISTANCE
These mats are resistant to degradation by inorganic acids, organic acids, reducing agents, detergent solutions, alcohols, aliphatic hydrocarbons, mineral oil, amines, and aldehydes.
Physical Properties
| EMBOSS PATTERN | Kid Grain | ||
| 0.093′′ ± 0.010′′ ; 3/32′′ | |||
| 900 lb/in² minimum | ASTM D412, Die C | ||
| ELONGATION | 125% minimum | ASTM D412, Die C | |
| TEAR | 150 lb/in minimum | ASTM D624, Die C | |
| DUROMETER | 85 ± 5, Shore A> | ASTM D2240 | |
| SURFACE RESISTIVITY | 107 – 108 /sq | ESD S4.1-1997 | |
| SUGGESTED SERVICE TEMPERATURE | –20 °F to +160 °F (2) | ||
TENSILE 900 lb/in² minimum ASTM D412, Die C
ELONGATION 125% minimum ASTM D412, Die C
TEAR 150 lb/in minimum ASTM D624, Die C
DUROMETER 85 ± 5, Shore A ASTM D2240
SURFACE RESISTIVITY 10 7 – 10 8 /sq ESD S4.1-1997
SUGGESTED SERVICE TEMPERATURE –20 °F to +160 °F
Why Choose Sumitron ?
