Hakko Preheater
Hakko Preheater
Hakko FR-872 Preheater
The HAKKO FR 872 is a preheater for large boards up to 330mm x 250mm.It has four heating zones. Each zone can be activated or deactivated individually. Only the activated areas are heated. This makes working on smaller boards and reworking on some smaller areas on large boards very comfortable. It has infrared carbon filaments to ensure efficient heating.It has various modes to ensure easy control of the heating temperature. It has adjustable guides that enable working with boards of different sizes.
Hakko FR-872 Preheater
The HAKKO FR 872 is a preheater for large boards up to 330mm x 250mm.It has four heating zones. Each zone can be activated or deactivated individually. Only the activated areas are heated. This makes working on smaller boards and reworking on some smaller areas on large boards very comfortable. It has infrared carbon filaments to ensure efficient heating.It has various modes to ensure easy control of the heating temperature. It has adjustable guides that enable working with boards of different sizes.
Hakko FR-872 Preheater
Features
New large-size preheater for large-size boards to make your job easier
Larger heating area for large-size boards
Four-Zone heating area
The heating area has been split into four zones that can be independently activated, making it possible to heat all of the board or only necessary areas when reworking large boards or to turn off unnecessary areas when reworking small boards.
High efficiency carbon heater
New high efficiency heating elements increase preheat performance striking a balance to mitigate IR shadowing while reducing glare from full spectrum heaters.
Four selectable modes to fit your process
Adjustable board attachment guides Board attachment guides can be adjusted easily to suit the size of the board. |
Specifications
Model No. | FR-872 |
Power Consumption | AC100V:1,050W AC110V:1,250W AC120V:1,440W AC220V:1,150W AC230V:1,250W |
Operation Mode | Power Mode, T/C Mode Auto Power Mode, Auto T/C Mode |
Setting Range : Power Mode | 0 to 100% |
Setting Range : T/C Mode | 50 to 200ºC |
Setting Range : Set Time | 0 to 999seconds |
Heating Element | High Efficiency Carbon Heater |
Effective Heated Area | 224(W)×266(D)mm |
Heater Area Dimensions | 286(W)×350(D)mm |
Heater Zone | 4 |
Temperature Sensor | K-Type Thermocouple |
Heater Lamp Lifetime | 2,100hours |
Heater Control | Power Mode : Percentage-Based System T/C Mode : PID control |
External Connections | Start signal input possible |
Dimensions | AC100-120V:360(W)×97(H)×535(D)mm AC220-230V:360(W)×97(H)×524(D)mm |
Weight | 5.6kg |
* Weight (w/o cord)
* Lamp life is provided for reference purpose only and is not guaranteed.
Hakko FR-870 Preheater
Hakko FR 870 is an infrared board preheater that comes with 6 infrared halogen lamps with a power consumption of 460 W. FR 870 is used to raise the temperature of the PCB. A heated PCB allows the components to be soldered more easily with good results. This device is suitable in areas where there is medium to high mass board assemblies and that can sink a significant amount of energy. This device has a unique power mode that allows you to set the output manually or thermocouple mode. The setting range for Power mode is 0-100%, whereas the setting range for T/C modem is 50 – 200 degree Celsius.
Features
- Infrared pre-heater that provides the optimal heating effect over the whole work piece surface
- Short heat up time realized by use of halogen lamps improves work efficiency
- Non-contact system enables its application to double-sided boards
- Auto Mode
Auto mode provides three steps (Step 1-3) to create an optimal heating profile for the work in question, letting all operators consistently produce work of the same quality. Programs can be set for ten channels in each mode. - K Type Thermocouple makes it sensitive to the temperature
Infrared halogen lamps provide powerful support for insufficient heat when reworking and mounting post-production add-ons
Specifications
Model No. | FR-870 |
Power Consumption | 460W |
Operation Mode | Power Mode, T/C Mode Power Auto Mode, T/C Auto Mode |
Setting Range : Power Mode | 0-100% |
Setting Range : T/C Mode | 50 to 200ºC |
Setting Range : Set Time | 0 to 999seconds |
Heating Element | Halogen Lamp |
Effective Heated Area | 190(W) x 80(D)mm |
Heater Area Dimensions | 248(W) x 140(D)mm |
Work Grid Partitions | 2 |
Temperature Sensor | K-Type Thermocouple |
Lamp Lifetime | 2000hour |
Dimensions | 290(W) x 100(H) x 308(D)mm |
Weight | 3.4kg |
Hakko FR-870B Preheater
The FR-870B is an updated replacement for the popular Hakko FR-870 IR Preheater that includes an upgrade to use the new high efficiency carbon filament lamps and the new software features found in the FR-872 4-zone IR preheater, thus allowing you to control the ramp rate at 1, 2, or 3 degrees Celsius per second when you are in one of the two thermocouple modes.
Features
- 2 independent switchable zones
- 248 mm x 140 mm PCB capacity
- Manual or Auto modes of operation
- Preheat control by Power or Thermocouple
- Soft EPO to protect assemblies
- Small footprint and low profile
- Faster than ceramic IR heating
- Integrates with the Hakko FR-803B and FM-206
Specifications
Model No. | FR-870B |
Power Consumption | 1130W |
Operation Mode | T/C Mode |
Setting Range : Power Mode | 0-100% |
Setting Range : T/C Mode | 50 to 200ºC |
Setting Range : Set Time | 0 to 999seconds |
Heating Element | High Efficiency Carbon Heater |
Effective Heated Area | 190(W)x80(D)mm |
Heater Area Dimensions | 248(W)x140(D)mm |
Work Grid Partitions | 2 |
Temperature Sensor | K-Type Thermocouple |
Lamp Lifetime | 2100hour |
Lamp Lifetime | 2100 hrs. |
Dimensions | 296(W)x100(H)x311(D)mm |
Weight | 3.2kg |
Industries Powered By Soldering Stations
Why Choose Sumitron ?