Hakko FR-702 Rework Station
Hakko FR-702 Rework Station
Hakko 702 B Rework Station is a four port rework station. The ports have two soldering irons, a de-soldering gun, and a hand piece for hot air SMD rework. The stations compact design saves a lot of bench space. Also, the station has a built-in double cylinder type vacuum generator that can provide a vacuum pressure of up to 80kPa(600mmHg), a suction flow of up to 15L/min, and an air flow up to 23L/Min. In addition, for soldering/desoldering purposes you can use a variety of tips or nozzles available in the Hakko series.
4 Port Rework Station with 140 W desoldering gun, M-type soldering iron and 670W hot air
Features
- It handles various soldering, desoldering and reworking by choosing proper handpieces from a selection of 7 types.
Other than the standard handpieces of 140 W desoldering gun, M-type soldering iron and high power & large volume hot air, there are 4 more applications. Consumed tip nozzle and heating element can be replaced individually, and running cost is much lower than the composite type.
Standard
Desoldering Gun HAKKO FR-4103 |
Soldering Iron M Type HAKKO FX-8801 |
Hot air handpiece |
-140 W high powers enable perfect desoldering for the components on multi-layer PWB.
-A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works. |
– Takes T18 tip series with improved thermal conductivity
|
– It enables quick removal of components with high power and large volume hot air for a various kinds of rework.
– Vacuum function with indicator makes it possible to remove components easily and safely.
|
N61 series nozzles | T18 series tips | N51 series nozzles |
Option
Soldering iron L type HAKKO FX-8805 |
N2 Soldering iron HAKKO FX-8802 |
One-hand Manual-solder-feed iron HAKKO FX-8803 |
SMD hot tweezers HAKKO FX-8804 |
|
View the details | View the details | View the details | View the details | |
T19 series tips | T18 series tips | 950/FX-8804 series tips |
- High-power Desoldering gun HAKKO FR-4103
Increasing the power to 140 W from 50 W of our previous models (HAKKO 474・475), it can make it easy to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time.
|
- Soldering iron FX-8801/FX-8805
Thermal conductivity has been increased by reviewing external configuration and internal structure of 900 tip series. |
- Hot air handpiece
670 W high power and large volume hot air improves work efficiency.
High power and large volume hot air for quick removal of components
- New type of nozzles for improvement of temperature characteristics
The new nozzle improves work efficiency with uniform heating by hot air convection inside the nozzle which is created due to vents on the nozzle top. (only with BGA nozzles) |
- Vacuum pickup function
The vacuum pick up function is to pick up a component with a suction pad and vacuum. It will pick a component only after the hot air melts solder joints. This can avoid an error to peel off the land by removing a component with excessive force. |
- Pickup indicator lets you know the pickup timing at a glance!
By pre-setting pickup function, a component can be picked up automatically when solder is melted. Then, the indication comes up and the moment of picking up will be visible. Even a component and solder joints cannot be seen as covered by a nozzle, easy and safe picking up is possible. |
- N2 soldering iron HAKKO FX-8802
The N2 gas runs into the nozzle assembly and covers over the soldering tip. It prevents the soldering tip and the heater from being readily oxidized and performs great role as a preheating. Two effects of N2 system, preventing oxidation or preheating effect, can improve soldering defects such as bridging, protrusion icicle, insufficient solder filling in PTH, etc. T18 tips series are compatible with this application. |
Specifications
Model No. | FR-702 |
Power Consumption | 1,030W |
Station
Dimensions | 370(W)×150(H)×220(D)mm |
Weight | 9kg |
Station (Soldering)
Output Voltage | AC 26V |
Temperature Range | 50 to 480ºC |
Temperature Stability | ±1ºC at idle temperature (When set to 200 to 480ºC) |
Station (Desoldering)
Output Voltage | AC 24 V |
Vacuum Generator | Vacuum Pump, Double Cylinder Type |
Vacuum Pressure | 80 kPa (600 mmHg) |
Suction Flow | 15 L/min. |
Temperature Range | 330 to 450ºC |
Temperature Stability | ±5ºC at Idle Temperature |
Station (Hot air)
Power Consumption | 30W |
Air Flow | 1 to 9 (5 to 115L/min.)L/min. |
Temperature Range | 50 to 600ºC |
Soldering iron
Power Consumption | 65W (26V) |
Tip to Ground Resistance | <2Ω |
Tip to Ground Potential | <2mV |
Heating Element | Ceramic Heater |
Standard Nozzle | Shape-B (No.T18-B) |
Cord Length | 1.2m |
Total Length | 222mm (with B tip) |
Weight | 52g (with B tip) |
Desoldering Gun
Power Consumption | 140W (24V) |
Nozzle to Ground Resistance | <2Ω |
Nozzle to Ground Potential | <2mV |
Heating Element | Composite Heater |
Standard Nozzle | Φ1.0mm S type (No.N61-05) |
Cord Length | 1.2m |
Total Length | 168mm (with Φ1.0mm S type nozzle) |
Weight | 170g (with Φ1.0mm S type nozzle) |
Handpiece (Hot air)
Power Consumption | 670W |
Total Length | 250mm |
Weight | 180g |
Industries Powered By Soldering Stations
Why Choose Sumitron ?