Hakko FM-204 Desoldering Equipment
Hakko FM-204 Desoldering Equipment
Hakko FM 204 is a desoldering station as a standard. However, it can be used with FM-2027 and FM-2026 for soldering purposes. It comes with a built-in vacuum pump. This desoldering tool can be used as a gun or straight type by just removing the detachable handle. It has an integrated nozzle that contains both the heater and the sensor to provide optimal thermal recovery when compared to conventional tips. The station also comes with amazing features, such as sleep function and auto power shut-off function that help increase the life of the tool.
FM-204
Even Easier-to-use FM Series Desoldering Tool
Features
- Vacuum Pump Type Desoldering Tool
- Excellent Thermal Recovery
The integrated nozzle containing both heating element and sensor provides higher thermal recovery than conventional tips
- Soldering work is possible by replacing the handpiece.
- Selectable grip
- Two-way use of gun type and straight type is available.
Gun configuration | Straight configuration |
- Easy maintenance
- Filter pipe replacement:
- Disposable paper filter pipe
- Easy to dispose of paper and solder separately
- Filter pipe replacement:
-
- Nozzle replacement:
- Safe to replace with nozzle remover
- Replaceable even before the end of nozzle has cooled down
- Nozzle replacement:
(1) Detach the nozzle remover |
(2)Firmly attach the nozzle remover to the nozzle cartridge as shown in the picture. | (3)Pull the nozzle remover with the nozzle cartridge in one stroke. |
- Power save function
- Sleep function: When the handpiece is placed on the Iron Holder (FH200-01/FH200-02), the sleep function operates and decreases the unused tip temperature up to approximately 200°C , preventing the tip from being oxidized.
In addition, this function can relieve the loads applied to the tip due to the high-temperature settings required for lead-free soldering
*The connecting cable enables the iron holder and temperature controller to be activated. - Auto power shut-off function: By connecting the iron holder (FH-200) to the connecting cable, the auto power shut-off function is activated in the same manner as the sleep function.
– Selectable buzzer and alert ON/OFF setting Buzzer and alert sound generation upon error and when reaching the setting temperature can be selected. ON/OFF-settable buzzer sound
- Sleep function: When the handpiece is placed on the Iron Holder (FH200-01/FH200-02), the sleep function operates and decreases the unused tip temperature up to approximately 200°C , preventing the tip from being oxidized.
Specifications
Model No. | FM-204 |
Power Consumption | 120 W |
Temperature Range | FM-2024 : 350 to 450℃ FM-2026/2027 : 200 to 450℃ |
Temperature Stability | ±5℃ at Idle Temperature |
Station
Output Voltage | AC 24 V |
Vacuum Generator | Vacuum Pump, Double Cylinder Type |
Vacuum Pressure | Max. 80 kPa (600 mmHg) |
Suction Flow | 15 L/min. |
Dimensions | 160 (W) × 120 (H) × 225 (D) mm |
Weight | 3.7 kg |
Desoldering Tool
Power Consumption | 70 W (24V) |
Tip to Ground Resistance | <2 Ω |
Tip to Ground Potential | <2 mV |
Heating Element | Composite Heater |
Cord Length | 1.2 m |
Total Length | 180 mm (with N1-10 nozzle) |
Weight | 65 g (with N1-10 nozzle) |
Industries Powered By Soldering Stations
Why Choose Sumitron ?