Hakko FA-430 Smoke Absorber
Hakko FA-430 Smoke Absorber
Hakko FA 430 is a smoke suction device that removes soldering smoke and fumes in a quick, safe, and an efficient manner. It protects the operator from breathing harmful fumes that might cause headache, dizziness, or eye trouble. This suction device has a powerful suction mechanism that uses ducts and yet it is silent. This device comes with a selectable air volume that allows you to select the amount of air volume that you want to throw out. In addition, this suction device has an automatic filter replacement light that makes your life easy when replacing a filter and ensures optimum performance.
Features
- Quiet operation and powerful suction.
Exhaust noise has been reduced without sacrificing suction performance by the addition of a silencer unit to the exhaust outlet to ensure smooth air outflow. A high-performance motor with 1,500 Pa of static pressure provides powerful suction and quiet operation.
|
 |
||||||||||||||||||||
*Values measured when the unit was used with a 60 Hz power supply.
- Notes regarding graph:
-
The HAKKO FA-430 features significantly reduced noise level in medium airflow mode despite the fact that suction performance remains almost unchanged compared to the previous model. High airflow mode also provides quieter operation than the previous model.
*Suction performance values are for when two ducts are used.
*Measured values for HAKKO 421 were taken when the unit was used with a 60 Hz power supply.
- Catch harmful smoke with freestanding ducts and adjustable air volume to suit your working environment
Is your smoke absorber affected by air conditioning? Are you fed up with having to re-adjust ducts after every line change? The HAKKO FA-430 fume extractor is the answer to your problems. - Airflow adjustment
Three airflow modes are available: High, Medium, and Low. Significantly improve your working environment by using an airflow volume that suits the worksite and the job.
- Low mode: Not easily affected by the surrounding environment. For use in small, quiet locations. (For when low-noise operation is a priority.)
- Medium mode: For normal use.
- High mode: For use in locations that are significantly affected by the surrounding environment. (For when suction performance is a priority.)
What do you mean by “surrounding environment”?
Smoke flows in unexpected directions due to a variety of factors; not just because of the influence of air conditioning. High mode is recommended if your worksite is situated near a doorway, in a spot where people continuously pass by, near the exhaust outlet of a large machine, or in a similar location. It is possible to use low mode in laboratories and other places where these kinds of influences are limited.
- Freestanding ducts
Ducts can be bent or lengthened as desired and maintain their shape after adjustment, letting you place them exactly where suction is needed. Say goodbye forever to ducts that are long, heavy, and hard-to-handle.
| Length | Weight | |
|---|---|---|
| Duct for HAKKO FA-430 | 1.2 m | 0.6 kg |
 |
Small photo on left circled in red: Large photo on left: |
 |
 |
 |
 |
|
If the duct is mounted at an angle above the workpiece, it is easily affected by air conditioning |
If the duct is mounted directly above, it can be difficult to see the workpiece |
Duct is mounted on the worktable to provide excellent suction performance |
- Filter replacement notification function ensures excellent trapping efficiency can be maintained at all times.
No matter how sophisticated a fume extractor is, if the filter is not replaced at the correct time, it will not be able to give maximum performance. The HAKKO FA-430 detects the number of fan revolutions and notifies the operator of the appropriate time to replace the filter, guaranteeing a comfortable working environment.
- Pre-filter
When the pre-filter is 80% clogged or has been used for 200 hours, the orange indicator flashes on and off.
-
- Main filter
When the 10th pre-filter needs replacing, the orange and red lamps flash on and off.
- Main filter
Usage/Applications
Installation of the pre-filter
Proper installation |
Improper installation |
| Install the pre-filter inside the frame of the main filter as shown in image 1. Be sure to check that there are no gaps at the corners as shown in image 2. |
If the pre-filter is not installed properly as shown in images 3 and 4, the main filter will degrade its original performance quickly. |
 |
 |
Specifications
| Model No. | FA-430 |
| Power Consumption | 120W |
| Noise Level | 50dB (MEDIUM mode) |
| Maximum Suction Capacity | with single duct : MAX. 4.1m3/min. (145cfm) with two ducts : MAX. 4.7m3/min. (167cfm) |
| Filtering efficiency | 99.97% 0.3µm (LOW, MEDIUM mode) 99.96% 0.3µm (HIGH mode) |
| Static Pressure | 1,500Pa |
| Duct Set (sold separately) | Length of duct : Φ55mm×1.2m (ESD SAFE) |
| Dimensions | 330(W)×366(H)×343(D)mm |
| Weight | 7.5kg |
* Weight (w/o cord)
* Filtering efficiency is an initial value of collection efficiency based on counting method for airborne dust collected by a single plate of filter (unfolded).
* Noise level is measured at a distance of 1 m from the face of unit in an anechoic room.
* Net in duct sets are not protected against electrostatic discharge.
Industries Powered By Soldering Stations
Automotive Industry
In the automotive sector, soldering stations are used to join radiator cores, electrical components, and wiring harnesses.
Aerospace and Defense
Aerospace and defense industries rely on soldering for critical applications. Soldered connections withstand extreme conditions, including high temperatures and vibrations.
Consumer Electronics
Soldering stations are indispensable in the production of consumer electronics. From smartphones to home appliances, soldered connections are vital for functionality.
Electronics and Electrical Engineering
Soldering is at the heart of electrical engineering. Engineers use soldering stations to create solid connections between electronic components on circuit boards, ensuring proper functionality
Medical Device Manufacturing
Medical devices require precise soldering to ensure safety and reliability. Soldering stations are used to assemble components in devices like pacemakers, diagnostic equipment, and surgical tools
Automotive Industry
In the automotive sector, soldering stations are used to join radiator cores, electrical components, and wiring harnesses.
Aerospace and Defense
Aerospace and defense industries rely on soldering for critical applications. Soldered connections withstand extreme conditions, including high temperatures and vibrations.
Consumer Electronics
Soldering stations are indispensable in the production of consumer electronics. From smartphones to home appliances, soldered connections are vital for functionality.
Electronics and Electrical Engineering
Soldering is at the heart of electrical engineering. Engineers use soldering stations to create solid connections between electronic components on circuit boards, ensuring proper functionality
Medical Device Manufacturing
Medical devices require precise soldering to ensure safety and reliability. Soldering stations are used to assemble components in devices like pacemakers, diagnostic equipment, and surgical tools
Why Choose Sumitron ?
